USB datalogger - Voltage and 4-20mA Loop
These data loggers measure and store up to 32,000 readings over a 0 to 30Vd.c. or 4 to 20mA range. The user can easily set up the logging rate and start time and download the stored data by plugging the data logger into a PC’s USB port and running the purpose designed software under Windows 7, 8 and 10. Data can then be graphed, printed and exported to other applications. The data logger is supplied with a long-life lithium battery. The status of the data logger is indicated by two red and green LEDs. The data logger is connected to the measurement circuit using a part of screw terminals in the cap and is supplied with a set of measurement leads terminating in crocodile clips.
- 0 to 30V d.c. voltage measurement range (357-770)
- 4-20mA current loop measurement range (357-780)
- USB interface for setup and data download
- Connection via two screw terminals in the cap
- User-programmable alarm thresholds
- Supplied with lithium battery and Windows control software
- Data logger set-ups: Logger Name, Logging rate (1s, 10s, 1m, 5m, 30m, 1hr, 6hr, 12hr), High and Low Alarms, Start Date and Start Time
The following types are available: